Top dos mais postadores
Dxmar (348)
 
tojose1 (203)
 
Lucyfer (167)
 
raul7 (152)
 
J.P. (148)
 
espadashare23 (135)
 
p.rodrigues (122)
 
dnice (109)
 
pedro2121 (108)
 
Shark (108)
 

Fevereiro 2017
SegTerQuaQuiSexSabDom
  12345
6789101112
13141516171819
20212223242526
2728     

Calendário Calendário

Login

Esqueci minha senha

Buscar
 
 

Resultados por:
 

 


Rechercher Busca avançada

Flag Counter

Configurar Multics (multics.cfg) (Update 27/11/2016)

Ver o tópico anterior Ver o tópico seguinte Ir em baixo

Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  Dxmar em Dom 12 Abr 2015, 00:15

Update 27/11/2016

Esta é a configuração que eu uso no meu multics. Simples, prática, apenas com o essencial.

Também devo referir que esta configuração foi feita por mim ao estudar o site www.infosat.org/multics/


##### CONFIGURAÇÃO #####
HTTP PORT: 30000
HTTP USER: admin
HTTP PASS: admin
HTTP AUTOREFRESH: 1
HTTP EDITOR: ON
HTTP RESTART: ON
HTTP TITLE: "MultiCS R81"

FILE CHANNELINFO: "/var/etc/CCcam.channelinfo"
FILE PROVIDERINFO: "/var/etc/CCcam.providers"
#FILE STYLESHEET: "/var/etc/multics.css"
FILE IP2COUNTRY: "/var/etc/ip2country.csv"
INCLUDE: "/var/etc/dcw.cfg"
HTTP FILE: "/var/etc/multics.cfg", "/config"

CCCAM VERSION: 2.2.1
CCCAM PORT: 12000
CCCAM NODEID: 12345654862f99c2a
CCCAM KEEPALIVE: YES
CCCAM DCW CHECK: YES

NEWCAMD CLIENTID: 4344
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14

DEFAULT DCW TIMEOUT: 10000
DEFAULT DCW MAXFAILED: 12
DEFAULT DCW CHECK: YES
DEFAULT SERVER MAX: 0
DEFAULT SERVER FIRST: 1
DEFAULT SERVER INTERVAL: 50
DEFAULT SERVER TIMEOUT: 10000
DEFAULT SERVER VALIDECMTIME: 5000
DEFAULT RETRY NEWCAMD: 3
DEFAULT RETRY CCCAM: 10
DEFAULT CACHE TIMEOUT: 1000
DEFAULT DISABLE RADEGAST: YES
DEFAULT DISABLE CAMD35: YES
DEFAULT DISABLE CS378X: YES
DEFAULT DISABLE CACHEEX: YES
DEFAULT DCW MINTIME: 0
DEFAULT CCCAM CHECKDCW: YES
DEFAULT MGCAMD CHECKDCW: YES
DEFAULT NEWCAMD CHECKDCW: YES

MGCAMD PORT: 32000
MGCAMD KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
MGCAMD PROFILES: 20001,20002,20003
MGCAMD KEEPALIVE: YES
MGCAMD DCW CHECK: YES

FREECCCAM PORT: 33000
FREECCCAM USERNAME: teste
FREECCCAM PASSWORD: teste
FREECCCAM MAXUSERS: 100
FREECCCAM DCWMINTIME: 0


#####  CACHE #####
CACHE PORT: 31000
CACHE TIMEOUT: 500
CACHE AUTOADD: NO
CACHE FILTER: YES
CACHE ALIVETIME: 35

#Aqui metem as caches que trocam. Segue o exemplo abaixo.
CACHE PEER: dns porta 1


#####  LINHAS #####
C: dns porta user pass
N: dns porta user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

#Aqui metem as linhas que trocam. Tanto linhas C como linhas N.
#NOTA: para organizarem melhor as vossas linhas, aconselho a meter o nome/nick da pessoa com quem trocaram à frente da linha com um #     EXEMPLO: C: dns porta user pass #joaquim123 do tugacs.com


#####  CLIENTES N #####
USER: user pass { profiles=20004,20005,20006 }

#Aqui criam as linhas N para trocarem. Metem user e pass e depois em { profiles= } metem as portas dos profiles que querem enviar. Se querem enviar todos os profiles até podem apagar e só fica USER: user pass


#####  LINHAS F #####
f: user pass 1 { profiles=20004,20005 }

#Aqui criam as linhas C para trocarem. Metem user e pass, o 1 só metem se quiserem dar um de reshare, 2 é para dar dois de reshare,... e em { profiles= } é a mesma situação que na criação das linhas N.


#####  PROFILES #####
[MIAU]
PORT :20001
CAID: 0100
PROVIDERS: 5211, 5221, 5225
ONID: 0053
ECM CHECK: YES
ECM LENGTH: 64,69
DCW TIMEOUT : 2000
SERVER TIMEOUT: 2000
SERVER VALIDECMTIME: 2500

[NOZ]
PORT :20002
CAID: 1802
PROVIDERS: 0, 4801, 4901
ONID: 0036
ECM CHECK: YES
ECM LENGTH: 92
DCW TIMEOUT : 2000
SERVER TIMEOUT: 2000
SERVER VALIDECMTIME: 2500

[D+]
PORT: 20003
CAID: 1810
PROVIDERS: 0, 4001, 4101
ONID: 0031
ECM CHECK: YES
DCW TIMEOUT : 2000
SERVER TIMEOUT: 2000
SERVER VALIDECMTIME: 2500

#Aqui podem adicionar todos os profiles que quiserem. Deixo estes três que são os mais utilizados pelos portugueses.
#NOTA: só devem alterar em DCW TIMEOUT e SERVER TIMEOUT os tempos de ECM. Se tiverem freezes na vossa TV devem aumentar este valor para que não filtre certos ECM mais altos, naqueles canais onde ainda têm poucas trocas, mas 2000 já deve ser um valor bastante aceitável.


Última edição por Dxmar em Sab 03 Dez 2016, 17:36, editado 7 vez(es)

Dxmar
Admin
Admin

Mensagens : 348
Score : 18192
Reputação : 1460
Data de inscrição : 01/12/2009

Ver perfil do usuário http://www.tugacs.com

Voltar ao Topo Ir em baixo

config_ multi

Mensagem  chakall em Ter 21 Abr 2015, 19:23

boas malta esta opeçao nao esta mal pois uso a 6576, NEWCAMD CLIENTID: 4344 ????

_________________________________________________________
dreambox 800se + vps
chakall
skype: virgilio-f-gomes@hotmail.com

chakall
Bronze
Bronze

Mensagens : 31
Score : 6200
Reputação : 0
Data de inscrição : 22/11/2013
Idade : 52
Localização : braga

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  Dxmar em Ter 21 Abr 2015, 19:39

@chakall escreveu:boas malta esta opeçao nao esta mal pois uso a 6576, NEWCAMD CLIENTID: 4344 ????

Boas, ambas estão certas, e a mais utilizada é a 4343

Olha isto do ficheiro de configuração do multics do Evileyes:

#NEWCAMD CLIENTID: 4343 # Mgcamd(6D67).newcs(6E73).Evocamd(6576).CCcam(4343)

Dxmar
Admin
Admin

Mensagens : 348
Score : 18192
Reputação : 1460
Data de inscrição : 01/12/2009

Ver perfil do usuário http://www.tugacs.com

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  seamouse em Seg 09 Maio 2016, 12:48

INCLUDE: "/var/etc/dcw.cfg"

not needed in r82 as built in

think as well r81 not needed

seamouse

Mensagens : 5
Score : 1645
Reputação : 20
Data de inscrição : 05/05/2016

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  xtream em Ter 15 Nov 2016, 13:18

Boas

Será possível incluir na config a MGCAMD?
Obrigado

xtream
Bronze
Bronze

Mensagens : 28
Score : 5024
Reputação : 0
Data de inscrição : 09/10/2014

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  espadashare23 em Ter 15 Nov 2016, 13:30

@xtream escreveu:Boas

Será possível incluir na config a MGCAMD?
Obrigado

claro que sim, se procura-se um bocadinho na net,
adiciona isto no multics.conf

###########################################################
## MGCAMD SERVER
###########################################################
MGCAMD PORT : a que quiseres
MGCAMD KEY : 01 02 03 04 05 06 07 08 09 10 11 12 13 14(podes meter como quiseres)
#MGCAMD PROFILES: 5501, 5503, 5504 # default profiles available for mgcamd clients.
#Clients
#MGUSER: test test # send cartas of all profiles
#MGUSER: test test 300 # send cartas of all profiles with min. ecmtime = 300ms

_________________________________________________________
não respondo a pm.

espadashare23
Platinum
Platinum

Mensagens : 135
Score : 6926
Reputação : 680
Data de inscrição : 11/02/2015

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  xtream em Ter 15 Nov 2016, 15:22

Ok, amigo.

Obrigado

Abraço

xtream
Bronze
Bronze

Mensagens : 28
Score : 5024
Reputação : 0
Data de inscrição : 09/10/2014

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  espadashare23 em Qua 16 Nov 2016, 21:45

e então conseguiste o que querias?

_________________________________________________________
não respondo a pm.

espadashare23
Platinum
Platinum

Mensagens : 135
Score : 6926
Reputação : 680
Data de inscrição : 11/02/2015

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  xtream em Qui 17 Nov 2016, 15:21

Sim amigo.

A ajuda foi preciosa.

Muito obrigado

xtream
Bronze
Bronze

Mensagens : 28
Score : 5024
Reputação : 0
Data de inscrição : 09/10/2014

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  Dxmar em Dom 27 Nov 2016, 18:54

Update 27/11/2016

Estudei a página www.infosat.org/multics/ e fiz bastantes melhorias à configuração original.

Agora podem usar a que eu postei no primeiro post deste tópico, e se quiserem fazer uma coisa só vossa podem passar pelo site do infosat.org para tal.

Dxmar
Admin
Admin

Mensagens : 348
Score : 18192
Reputação : 1460
Data de inscrição : 01/12/2009

Ver perfil do usuário http://www.tugacs.com

Voltar ao Topo Ir em baixo

Re: Configurar Multics (multics.cfg) (Update 27/11/2016)

Mensagem  Shark em Seg 06 Fev 2017, 17:47

Boas,

Em primeiro lugar, um grande obrigado (mais um!) ao @Dxmar por colocar estes tutoriais que fazem com que se torne 'simples' meter um CS Server em cima, para nabos como eu.Razz

Já meti um Oscam em cima e agora, com este e o outro tuto, um MCs.Wink  

Como tenho a mania, fui logo para o R82 e a pergunta é... se todas as configs deste se mantêm para o 82?
É que as conexões aos parceiros (trocas CLine) são lentas ou nem se fazem. Inicialmente fica a verde, vermelho, verde..., fica ali uns 5/10 minutos nisto. Alguns "agarra" e outros nem por isso.

Tenho aqui umas configs default do R82 (dizia que era do R82) e aproveito para partilhar aqui com os outros amigos.
Código:
##########################################################
## Files
##########################################################

FILE CHANNELINFO: "/var/etc/CCcam.channelinfo"  ## default is disabled
FILE PROVIDERINFO: "/var/etc/CCcam.providers" ## default is disabled
FILE IP2COUNTRY: "/var/etc/ip2country.csv"  ## default is disabled
FILE STYLESHEET: "/var/etc/multics.css" ## default is the built-in stylesheet file.
INCLUDE: "/var/etc/profiles"

## country ip blocker of clients connections ( file ip2country BLOCK COUNTRY: TN # Block all clients connecting from Tunisia
BLOCK COUNTRY: FR,DE # Block all clients connecting from France or Germany

##########################################################
## BAD DCW List
##########################################################

## BAD DCW ( the next examples are filtered automatically by multics )
//BAD-DCW: FD FF FF FB FD FF FF FB FD FF FF FB FD FF FF FB
//BAD-DCW: 00 01 02 03 00 01 02 03 00 01 02 03 00 01 02 03

##########################################################
## HTTP SERVER
##########################################################

#Listening port for HTTP server. default: 5500 (0=disabled)
HTTP PORT: 12345

#change web page title
HTTP TITLE: "my server"

#Basic authentification Username for the HTTP server
HTTP USER: admin

#Basic authentification Password for the HTTP server
HTTP PASS: admin

#download/show filepath in your browser by entring the url:  http://your_server_hostname:<http_port>/url
HTTP FILE: "/var/tmp/multics.log", "/log", "text/plain"
    # show log file in your browser, mime is specified as the file doesnt have a known extention
HTTP FILE: "/var/etc/compressed.rar", "/download.rar"
    # download file "/var/etc/compressed.rar" from your browser as "download.rar"
HTTP FILE: "/var/www/mypage.html", "/mypage.html"
    # show the page "/var/www/mypage.html"
HTTP FILE: "/var/www/background.jpg", "/background.jpg"
    # show the image "/var/www/background.jpg"
HTTP FILE: "/var/www/favicon.png", "/favicon.png"

#Flag to Show editor button/page in web interface (default is ON)
HTTP EDITOR: OFF # disable editor

#Show restart button/page in web interface (default is ON)
HTTP RESTART: OFF # disable restart from web interface

#Web Page refresh time in milliseconds (default: 10000 ~ 10s)
HTTP AUTOREFRESH: 5000

##########################################################
## CLUSTERED CACHE (Compatible with CSP cache)
##########################################################

#Cache listening port (UDP), (default:0 disabled)

CACHE PORT: 10000 # Server 1
CACHE PEER: host.com 8964

CACHE PORT: 20000 # Server 2
CACHE PEER: host2.com 7895

#interval in which cache data are treated
CACHE ALIVETIME: 35

#the minimum number of peers sending same DCW to be accepted (default=1)
CACHE THRESHOLD: 3 # accept every DCW only if it is received from 3 or more peers

#filter all non cycling DCW from incoming cache/cacheex data
CACHE FILTER: YES

#accept/block unknown peers
CACHE AUTOADD: NO # block all unknown peers
CACHE AUTOADD: YES, NO  # add all unknown peers and set their status to inactive (disabled)
CACHE AUTOADD: YES, YES # add all unknown peers and set their status to active (enabled)
# Multiple cache from one host will be added and set disabled.

#accept/block cache requests with networkid=0 (default is ON)
ACCEPT NULL ONID: OFF # block packets with unknown onid

#friend cacheline (host port)
CACHE PEER: myfriend.dns.org 12345 # connect to peer only if its version is greater than r66
CACHE PEER: localhost 5555 1 # block receiving/sending cache requests with networkid=0
CACHE PEER: localhost 4444 { csp=yes } # connect to peer using default cache protocol (csp/oscam)

##########################################################
## CCCAM SERVERS
##########################################################

#Select CCcam Client/Server version (default: 2.0.11)

CCCAM VERSION: 2.1.1

#Set nodeid for CCcam Client/Servers

CCCAM NODEID: 1122334455667788

#set default profiles for CCcam Server to share with clients (profiles are identified by their newcamd port)

CCCAM PROFILES: 5501, 5502

#Enable/Disable keepalive for incoming CCcam connections (clients)

CCCAM KEEPALIVE: YES # default=NO

#CCcam server listen port

CCCAM PORT: 18000
#Enable/disable dcw cycle check for cccam clients

CCCAM DCW CHECK: YES

#define cccam client to the current cccam server

## Reshares(DownHops)
F: user1 pass1  # share all profiles with no reshare
F: user2 pass2 1 # share all profiles with 1 reshare
F: user3 pass3 2 # share all profiles with 2 reshare

## Option: Profiles ( Option list can be separated by comma or by space, options are separated only by ';' )
F: user4 pass4 { profiles=5502,5504,5510 } # share only 3 profiles identified by their ports as locals with no reshare
F: user5 pass5 1 { profiles=5502 5504 5510 } # share only 3 profiles identified by their ports with 1 reshare

## Option: Name
F: user7 pass7 { \
    profiles=5502,5504,5510; \ # Profiles
    name=my dreambox; \ # Full Name
}  # share only 3 profiles identified by their ports as locals with no reshare

## Option: Host
F: user8 pass8 { \
    name = my dreambox; \ # Full Name
    host = 192.168.1.81 \ # user8 is only allowed to connect from the host 192.168.1.81
}

## Option: Shares (ShareLimtis)
F: user11 pass11 { \
    shares=0500:42800:0; \ # Send profiles to user10 but not the share (0500:042800)
}

F: user12 pass12 { \
    shares=0:0:0,0604:0:1; \ # Send only share (0604:0) to client.
}

F: user13 pass13 { \
    shares=0100:0:0; \ # Send profiles to client but not seca shares.
}

## Option: dcwcheck
F: user13 pass13 { \
    dcwcheck=YES; \ # enable dcw check for every incoming ecm request from this client
}

##### SECOND CCCAM SERVER

CCCAM PORT: 19000

## Second CCcam Server's clients
F: user1 pass1
F: user2 pass2

###########################################################
## FREECCCAM SERVER
###########################################################
#FREECCCAM server listen port (default=0:disabled)

FREECCCAM PORT : 7890

#Username

FREECCCAM USERNAME:: test

#Password

FREECCCAM PASSWORD: test

#Max clients to be connected to server, any other connection would be rejected or replaced by an inactive connection

FREECCCAM MAXUSERS : 100


###########################################################
## MGCAMD SERVER
###########################################################

#MGCAMD server listen port(default=0:disabled)

MGCAMD PORT : 23000

#Change mgcamd des key ( default = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 )

MGCAMD KEY : 81 82 83 84 85 86 87 88 89 80 81 82 83 84

#MGCAMD PROFILES: 5501, 5503, 5504 # default profiles available for mgcamd clients.

MGCAMD PROFILES: 5501, 5503, 5504 # default profiles available for mgcamd clients.

#Enable/Disable keepalive for incoming mgcamd connections (clients)

MGCAMD KEEPALIVE: YES # default=NO

#enable/disable dcw cycle check for mgcamd clients

MGCAMD DCW CHECK: YES


#MGCAMD USER: <username> <password> { <options> }
#MGUSER: <username> <password> { <options> }
#Define new client for the current mgcamd server

# Clients
MGUSER: user1 pass1 # send cartas of all profiles

## Option: Profiles ( Option list can be separated by comma or by space, options are separated only by ';' )
MG: user3 pass3 { profiles=5504, 5510 } # send cartas of 2 selected profiles

## Option: Name
MG: user5 pass5 { \
    profiles=5502,5504,5510; \ # Profiles
    name=my dreambox; \ # Full Name
}  # share only 3 profiles identified by their newcamd ports

## Option: Host
MG: user6 pass6 { \
    name = my dreambox; \ # Full Name
    host = 192.168.1.81 \ # user8 is only allowed to connect from the host 192.168.1.81
}

## Option: Shares (ShareLimtis)
MG: user9 pass9 { \
    shares=0100:3315:0; \ # Send profiles to client but not the share (0100:3315)
}

MG: user10 pass10 { \
    shares=0:0:0,09CD:0:1; \ # Send only share (09CD:0) to client.
}

MG: user11 pass11 { \
    shares=0500:0:0; \ # Send profiles to client but not viaccess shares.
}

## Option: dcwcheck
MG: user22 pass22 { \
    dcwcheck=YES; \ # enable dcw check for every incoming ecm request from this client
}

###########################################################
## CAMD35 SERVER
###########################################################

#CAMD35 PORT : <port value>
#CAMD35 server listen port(default=0:disabled)

CAMD35 PORT : 24000

#CAMD35 USER: <username> <password>
#Define new client for the current camd35 server

CAMD35 USER: user1 pass1

###########################################################
## CS378X SERVER
###########################################################

#CS378X PORT : <port value>
#CS378X server listen port(default=0:disabled)

CS378X PORT : 24000

#CS378X KEEPALIVE: <YES/NO>
#Enable/Disable keepalive for incoming cs378x connections (clients)

CS378X KEEPALIVE: YES # default=NO

#CS378X USER: <username> <password>
#Define new client for the current cs378x server

CS378X USER: user1 pass1


###########################################################
## SERVERS CONNECTIONS
###########################################################

###############

#C: <hostname/ip> <port> <username> <password> < { <options> } >
#CCCAM SERVER: <hostname/ip> <port> <username> <password> < { <options> } >
#Connection to CCcam Server

C: host.dnsdynamic.com \ # Server Hostname
    12345 \ # CCcam Server Port
    user \  # Username
    pass    # Password
# get all shares from server with reshare or not.

## OPTION 'profiles'
C: host.dnsdynamic.com 12345 user1 pass1 { profiles=5501,5502,5503 }
# use this server only for profiles with newcamd ports (5501,5502,5503)

## OPTION 'shares'
C: host.dnsdynamic.com 12345 user2 pass2 { shares= 0:0:2 }
# ignore shares more than 2 uphops away (0:0:2)

C: host.dnsdynamic.com 12345 user3 pass3 { shares= 0:0:3, 0100:3311:1 }
# ignore shares more than 3 uphops away (0:0:3) and accept share 0100:3311 only from their locals

C: host.dnsdynamic.com 12345 user4 pass4 { shares= 0:0:0, 0500:32830:2 }
# ignore all shares (0:0:0) but accept share 0500:32830 less than 2 uphops away

## OPTION 'sids'
C: host.dnsdynamic.com 12345 user5 pass5 { shares=0:0:0,0500:23800:1; sids=0385,038B,038F,03DE,36B2,36B3,36B8,36B9 }
# accept only locals for share(0500:23800) and send ecm request only for channels specified in sid list

#N: <hostname/ip> <port> <username> <password> <des key> < { <options> } >
#Connection to Newcamd/Mgcamd Server

N: localhost \ # Host
   4444 \ # Port
   user \ # Username
   pass \ # Password
   01 02 03 04 05 06 07 08 09 10 11 12 13 14 # DES key

## OPTION 'profiles'
N: host.dnsdynamic.com 12346 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 { profiles=5501,5502,5503 }
# use this server only for profiles with newcamd ports (5501,5502,5503)

## OPTION 'shares'
N: host.dnsdynamic.com 12346  user3 pass3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 { shares= 0:0:1, 0100:3311:0 }
# accept shares but ignore share(0100:3311)

N: host.dnsdynamic.com 12346 user4 pass4 01 02 03 04 05 06 07 08 09 10 11 12 13 14  { shares= 0:0:0, 0500:32830:1 }
# ignore all shares (0:0:0) but accept share(0500:32830)

## OPTION 'sids'
N: host.dnsdynamic.com 12346 user5 pass5 01 02 03 04 05 06 07 08 09 10 11 12 13 14 \
  { shares=0:0:0,0500:23800:1; sids=0385,038B,038F,03DE,36B2,36B3,36B8,36B9,4331,4332,4333,4334 }
# accept only locals

## Multiple port in one line
N: host.dnsdynamic.com 14000:14030 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# connect to servers with ports from 14000 to 14030

N: host.dnsdynamic.com 14000,14005:14007,14017,14021:14023 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# Connect to servers having the next ports: 14000, 14005,14006,14007, 14017, 14021, 14022, 14023

#R: <hostname/ip> <port> <caid> <provider list>
RADEGAST SERVER: <hostname/ip> <port> <caid> <provider list>
#Connection to Radegast Server

R: localhost 5421 0100 3311 3315

#L: <hostname/ip> <port> <username> <password> { shares = caid:pid1<&pid2><&...> }

CAMD35 SERVER: <hostname/ip> <port> <username> <password> { shares = caid:pid1<&pid2><&...> }

#Connection to Camd35 Server

CS378X SERVER: <hostname/ip> <port> <username> <password> { shares = caid:pid1<&pid2><&...> }

#Connection to cs378x Server


###########################################################
## CACHEEX SERVERS
###########################################################



#CCCAM SERVER: <hostname/ip> <port> <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Connect to CCcam cacheex server using mode 2/3

C: host.ddns.net 1234 cacheex1 pass { cacheex_mode=2; }
C: host.ddns.net 1234 cacheex2 pass { cacheex_mode=3; } # Send all profiles
C: host.ddns.net 1235 cacheex3 pass { cacheex_mode=3; shares=0100:81; } # Send only selected profiles

#CCCAM USER: <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Define new CCcam cacheex 2/3 client

F: cacheex1 pass { cacheex_mode=2; } # Send all profiles to client
F: cacheex2 pass { cacheex_mode=2; shares=0100:30; } # Send only selected profile
F: cacheex3 pass { cacheex_mode=3; }

#CAMD35 SERVER: <hostname/ip> <port> <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Connect to Camd35 cacheex server using mode 2/3

CAMD35 SERVER: host.ddns.net 1234 cacheex1 pass { cacheex_mode=2; }
L: host.ddns.net 1235 cacheex2 pass { cacheex_mode=3; } # send all profiles to server
L: host.ddns.net 1234 cacheex3 pass { cacheex_mode=3; shares=0500:42400; } # Send only selected profile

#CAMD35 USER: <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Define new camd35 cacheex 2/3 client

CAMD35 USER: cacheex1 pass { cacheex_mode=2; } # Send all profiles
CAMD35 USER: cacheex2 pass { cacheex_mode=2; shares=0603:0; } # Send only selected profiles
CAMD35 USER: cacheex3 pass { cacheex_mode=3; }

#CS378X SERVER: <hostname/ip> <port> <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Connect to cs378x cacheex server using mode 2/3

CS378X SERVER: host.ddns.net 1234 cacheex1 pass { cacheex_mode=2; }
CS378X SERVER: host.ddns.net 1234 cacheex2 pass { cacheex_mode=3; } # Send all profiles
CS378X SERVER: host.ddns.net 1235 cacheex3 pass { cacheex_mode=3; shares=0100:30; } # Send only csat profile

#CS378X USER: <username> <password> { cacheex_mode=<2/3>; <shares=...;> }
#Define new cs378x cacheex 2/3 client

CS378X USER: cacheex1 pass { cacheex_mode=2; } # Send all profiles
CS378X USER: cacheex2 pass { cacheex_mode=2; shares=0500:42400; } # Send only csat profiles
CS378X USER: cacheex3 pass { cacheex_mode=3; }

##########################################################
## PROFILES DEFAULT VALUES
##########################################################

#DEFAULT KEY: <des_key>
#change newcamd des key (default = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 )

DEFAULT KEY: 11 12 13 14 05 06 07 08 09 10 01 02 03 04

#DEFAULT DCW TIMEOUT: <value>
#delay after that if no cw returned from servers, multics would send decode failed to client

DEFAULT DCW TIMEOUT: 3500

#DEFAULT DCW MAXFAILED: <value>
#Default, maximum of successive decode failed returned from a carta on a channel to block sending ecm requests to this carta

DEFAULT DCW MAXFAILED: 10

#DEFAULT DCW CHECK: <YES/NO>
#Check and filter wrong dcw for this profile if the client sending request has dcwcheck enabled (default=0)

DEFAULT DCW CHECK: YES

#DEFAULT SERVER MAX: <value>
#(dont use) max server to use for decoding one ecm request. (default=0,unlimited)

DEFAULT SERVER MAX: 0

#DEFAULT SERVER FIRST: <value>
#the number of servers to send ecm upon receiving request (default=0, one server)

DEFAULT SERVER FIRST: 0

#DEFAULT SERVER INTERVAL: <value>
#Interval between sending ecm request to servers.
#first server will be requested at receiving ecm request from client,
#the second request will be done after "SERVER INTERVAL" has been elapsed and so ...

DEFAULT SERVER INTERVAL: 700

#DEFAULT SERVER TIMEOUT: <value>
#max time for selecting servers to decode one ecm request it must be greater than "SERVER INTERVAL"

DEFAULT SERVER TIMEOUT: 3000

#DEFAULT SERVER VALIDECMTIME: <value>
#Disable sending ecmrequest to cartas with ecmtime greater than 2000ms (default=0,all carta are accepted)

DEFAULT SERVER VALIDECMTIME: 2000

#DEFAULT RETRY NEWCAMD: <value>
#Number of retries for newcamd servers (default=0(no retry);max=3)

DEFAULT RETRY NEWCAMD: 0

#DEFAULT RETRY CCCAM: <value>
#Number of retries for CCcam servers if we got decode failed(default=0;max=10)

DEFAULT RETRY CCCAM: 0

#DEFAULT CACHE TIMEOUT: <value>
#maximum time to wait cw from cache after that ecm will be sent to servers

DEFAULT CACHE TIMEOUT: 300

#DEFAULT DISABLE CCCAM: <YES/NO>
#Enable/Disable sending ecm requests to CCcam servers (default=NO,enabled)

DEFAULT DISABLE CCCAM: YES # same as 'DEFAULT ENABLE CCCAM: NO' (by default CCcam servers are enabled)

#DEFAULT DISABLE NEWCAMD: <YES/NO>
#Enable/Disable sending ecm requests to newcamd servers (default=NO,enabled)

DEFAULT DISABLE NEWCAMD: YES # same as 'DEFAULT ENABLE CCCAM: NO' (by default Newcamd servers are enabled)

#DEFAULT DISABLE RADEGAST: <YES/NO>
#Enable/Disable sending ecm requests to radegast servers (default=NO,enabled)

DEFAULT DISABLE RADEGAST: YES # same as 'DEFAULT ENABLE RADEGAST: NO' (by default Radegast servers are enabled)

#DEFAULT DISABLE CAMD35: <YES/NO>
#Enable/Disable sending ecm requests to camd35 servers (default=NO,enabled)

DEFAULT DISABLE CAMD35: YES # same as 'DEFAULT ENABLE CAMD35: NO' (by default camd35 servers are enabled)

#DEFAULT DISABLE CS378X: <YES/NO>
#Enable/Disable sending ecm requests to cs378x servers (default=NO,enabled)

DEFAULT DISABLE CS378X: YES # same as 'DEFAULT ENABLE CS378X: NO' (by default cs378x servers are enabled)

#DEFAULT DISABLE CACHE: <YES/NO>
#Enable/Disable sending ecm requests to cache servers (default=NO,enabled)

DEFAULT DISABLE CACHE: YES # same as 'DEFAULT ENABLE CACHE: NO' (by default Cache is enabled)

#DEFAULT DISABLE CACHEEX: <YES/NO>
#Enable/Disable sending ecm requests to cacheex servers (default=YES,disabled)

DEFAULT DISABLE CACHEEX: NO # same as 'DEFAULT ENABLE CACHEEX: YES'

#DEFAULT CACHEEX MAXHOP: <Value>
#Define maxhop available to send cacheex data to peers (default=1,local)

DEFAULT CACHEEX MAXHOP: 2

#DEFAULT CACHEEX VALIDECMTIME: <value(ms)>
#Disable sending cacheex reply to peers when ecmtime is greater than 'CACHEEX VALIDECMTIME' (default=7000ms)

DEFAULT CACHEEX VALIDECMTIME: 5000

##########################################################
## NEWCAMD GLOBAL USERS
##########################################################

## Global Users, must be defined before the first profile
USER: guser1 gpass1  # for all profiles
USER: guser1 gpass1 { 5501, 5502 }  # selected profiles by port list

##########################################################
## PROFILE
##########################################################


#DEFAULT KEY: <des_key>
#change newcamd des key (default = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 )

DEFAULT KEY: 11 12 13 14 05 06 07 08 09 10 01 02 03 04

#DEFAULT DCW TIMEOUT: <value>
#delay after that if no cw returned from servers, multics would send decode failed to client

DEFAULT DCW TIMEOUT: 3500

#DEFAULT DCW MAXFAILED: <value>
#Default, maximum of successive decode failed returned from a carta on a channel to block sending ecm requests to this carta

DEFAULT DCW MAXFAILED: 10

#DEFAULT DCW CHECK: <YES/NO>
#Check and filter wrong dcw for this profile if the client sending request has dcwcheck enabled (default=0)

DEFAULT DCW CHECK: YES

#DEFAULT SERVER MAX: <value>
#(dont use) max server to use for decoding one ecm request. (default=0,unlimited)

DEFAULT SERVER MAX: 0

#DEFAULT SERVER FIRST: <value>
#the number of servers to send ecm upon receiving request (default=0, one server)

DEFAULT SERVER FIRST: 0

#DEFAULT SERVER INTERVAL: <value>
#Interval between sending ecm request to servers.
#first server will be requested at receiving ecm request from client,
#the second request will be done after "SERVER INTERVAL" has been elapsed and so ...

DEFAULT SERVER INTERVAL: 700

#DEFAULT SERVER TIMEOUT: <value>
#max time for selecting servers to decode one ecm request it must be greater than "SERVER INTERVAL"

DEFAULT SERVER TIMEOUT: 3000

#DEFAULT SERVER VALIDECMTIME: <value>
#Disable sending ecmrequest to cartas with ecmtime greater than 2000ms (default=0,all carta are accepted)

DEFAULT SERVER VALIDECMTIME: 2000

#DEFAULT RETRY NEWCAMD: <value>
#Number of retries for newcamd servers (default=0(no retry);max=3)

DEFAULT RETRY NEWCAMD: 0

#DEFAULT RETRY CCCAM: <value>
#Number of retries for CCcam servers if we got decode failed(default=0;max=10)

DEFAULT RETRY CCCAM: 0

#DEFAULT CACHE TIMEOUT: <value>
#maximum time to wait cw from cache after that ecm will be sent to servers

DEFAULT CACHE TIMEOUT: 300

#DEFAULT DISABLE CCCAM: <YES/NO>
#Enable/Disable sending ecm requests to CCcam servers (default=NO,enabled)

DEFAULT DISABLE CCCAM: YES # same as 'DEFAULT ENABLE CCCAM: NO' (by default CCcam servers are enabled)

#DEFAULT DISABLE NEWCAMD: <YES/NO>
#Enable/Disable sending ecm requests to newcamd servers (default=NO,enabled)

DEFAULT DISABLE NEWCAMD: YES # same as 'DEFAULT ENABLE CCCAM: NO' (by default Newcamd servers are enabled)

#DEFAULT DISABLE RADEGAST: <YES/NO>
#Enable/Disable sending ecm requests to radegast servers (default=NO,enabled)

DEFAULT DISABLE RADEGAST: YES # same as 'DEFAULT ENABLE RADEGAST: NO' (by default Radegast servers are enabled)

#DEFAULT DISABLE CAMD35: <YES/NO>
#Enable/Disable sending ecm requests to camd35 servers (default=NO,enabled)

DEFAULT DISABLE CAMD35: YES # same as 'DEFAULT ENABLE CAMD35: NO' (by default camd35 servers are enabled)

#DEFAULT DISABLE CS378X: <YES/NO>
#Enable/Disable sending ecm requests to cs378x servers (default=NO,enabled)

DEFAULT DISABLE CS378X: YES # same as 'DEFAULT ENABLE CS378X: NO' (by default cs378x servers are enabled)

#DEFAULT DISABLE CACHE: <YES/NO>
#Enable/Disable sending ecm requests to cache servers (default=NO,enabled)

DEFAULT DISABLE CACHE: YES # same as 'DEFAULT ENABLE CACHE: NO' (by default Cache is enabled)

#DEFAULT DISABLE CACHEEX: <YES/NO>
#Enable/Disable sending ecm requests to cacheex servers (default=YES,disabled)

DEFAULT DISABLE CACHEEX: NO # same as 'DEFAULT ENABLE CACHEEX: YES'

#DEFAULT CACHEEX MAXHOP: <Value>
#Define maxhop available to send cacheex data to peers (default=1,local)

DEFAULT CACHEEX MAXHOP: 2

#DEFAULT CACHEEX VALIDECMTIME: <value(ms)>
#Disable sending cacheex reply to peers when ecmtime is greater than 'CACHEEX VALIDECMTIME' (default=7000ms)

DEFAULT CACHEEX VALIDECMTIME: 5000

##########################################################
## TELNET SERVER
##########################################################


#TELNET PORT: <value>
#Change telnet listen port
#default port for telnet is 0 (disabled)

TELNET PORT: 15000

#TELNET USER: <username>
#The telnet server is protected with a username and password

TELNET USER: admin

#TELNET PASS: <password>
#The telnetinfo service is protected with a username and password

TELNET PASS: admin

#Supported commands

###help: show commands list
###uptime: show execution time
###stat: show number of different servers
###cccam: display cccam servers connections status
###mgcamd: display mgcamd servers connections status
###debug: display latest debug lines
###loadavg: display cpu load average
###cpuinfo: display cpu info
###meminfo: display memory info
###exit: disconnect from server
Tenho dúvidas porque e por exemplo, o @Dxmar tem em cima a versão 2.2.1 e aqui (R82) só funciona até à 2.1.3, qualquer outra passa para 2.0.11.
Código:
CCCAM VERSION: 2.2.1

Shark

Shark
Platinum
Platinum

Mensagens : 108
Score : 3373
Reputação : 450
Data de inscrição : 06/11/2016

Ver perfil do usuário

Voltar ao Topo Ir em baixo

Ver o tópico anterior Ver o tópico seguinte Voltar ao Topo

- Tópicos similares

 
Permissão deste fórum:
Você não pode responder aos tópicos neste fórum